Viewing 1 reply thread
  • Author
    Posts
    • #10899
      Anonymous
      Inactive

      Cassandra in Phoenix asks:

      I was referred to you by a company called Brosamer Bells to inquire about information on bells. A client of ours has purchased bells from Brosamer’s to include in their catholic Church and I had some questions about bells in general. Mainly I was curious about the required maintenance for bells, what that entails, how often they need to be maintained, and simpler questions like is there a standard on how far off the ground the ropes of the bells should be etc. If someone could get back to me via email that would be greatly appreciated. Thank you.

      If you can help, please post a response.
      Admin

      This inquiry was originally sent to the ABA’s Internet Coordinator. Responses are opinions of individuals based on their personal research and knowledge.
      -00952-

    • #13911
      hjlong
      Member

      In general, bells are pretty durable. If they are bronze, they require little maintenance. If the bell sees a lot of usage, the bell should be rotated on the yoke periodically to avoid continued striking of the clapper at the same site in the bell. If it is used infrequently, rotation does not need to take place as frequently. All moving joints should be lubricated with grease on a regular basis. All cast steel hardware should be painted periodically with a protective rust inhibiting coating to prevent rusting and corrosion. All wooden mountings should be inspected regularly and repaired when rot is noted in order to avoid a catastrophic collapse of the supporting structure. Wood should be protected by a good water sealant and protective coating. If your bell rocks, that motion will pull on the mounting bolts and will loosen the frame if mounted on wood. These should be maintained in a tight condition. Mounting of the frame on steel beams is to be preferred. The rope should not extend to the floor, and should only come close to the floor when the bell is at full upright rotation. If you have a cast steel bell, it needs the same maintenance, but will need a protective rust inhibiting coating in the bell. All bells should be protected from birds and bird droppings as the droppings are quite corrosive.
      Harry Long, MD

Viewing 1 reply thread
  • You must be logged in to reply to this topic.